SAILS
Our BG Sails have been a dominant force on the world stage over the past decade having been used by the winners of the majority of IRSA World Championships held since 2007 in the IOM, Marblehead and Ten Rater classes, with National championship wins too numerous to mention.
Such performance at the highest level across differing classes, designs and a wide range of skippers, reflects our knowledge in producing sail shapes that work in harmony with modern rig geometry practice to provide a more user friendly experience for skippers at all levels of competition.
Our passion in pursuit of the optimum sail design matched to a given rig, is one that compliments the design freedom offered across the four IRSA recognised classes, where those prepared to test and challenge themselves in design, manufacture and skipper ability are rewarded like no other against the best in the world.
If you would like to order a suit of our sails for any of the below listed classes, we ask that you take the time to read through our specifications and ordering information before emailing your requirements to us.
Sail Specifications
* All mainsails are available in the luff finish of your choice with eyelets as standard. Our jibs use a wire luff encased in a pocket as standard.
* Corner patches are in the finger style, available in white, black, grey, light grey, navy blue, royal blue, yellow, red, green, fluro yellow, fluro orange or fluro pink.
* Jib luff tapes are available in white, black, grey, navy blue, royal blue, light blue, yellow, red, green, purple, fluro yellow, fluro orange or fluro pink.
* Tell tails are fitted to all jibs.
* World Sailing/IRSA 2017-2020 compliant re-usable sail numbering and class insignia templates are available for purchase through our store.
* All BG sails are made in materials that we believe to best suit each class. Film weights and translucency at times may vary slightly from those listed dependent on availability and suitability.
* M and 10R pocket luff mainsails (1850mm luff and lower) when available are manufactured under design agreement with SAILSetc.
* For Marblehead, 10 Rater (lower suits) and A Class (lower suits) when available, we have standard ratio sizes to suit many popular designs on file. Should our sail plans not be suitable, or you are unable to provide us with a full size accurate plan, we are happy to produce you a suit of custom sails at an additional fee.
Additional charges (per suit)
Wire luff in mainsail pocket (IOM, M) £7
Slides to suit groovy mast £7
Sail numbering outline in permanent marker £12
Pocket luff lower suit mainsail (M, 10R, RA) £25
Non standard sail film/materials POA
Custom sail plan POA
Such performance at the highest level across differing classes, designs and a wide range of skippers, reflects our knowledge in producing sail shapes that work in harmony with modern rig geometry practice to provide a more user friendly experience for skippers at all levels of competition.
Our passion in pursuit of the optimum sail design matched to a given rig, is one that compliments the design freedom offered across the four IRSA recognised classes, where those prepared to test and challenge themselves in design, manufacture and skipper ability are rewarded like no other against the best in the world.
If you would like to order a suit of our sails for any of the below listed classes, we ask that you take the time to read through our specifications and ordering information before emailing your requirements to us.
Sail Specifications
* All mainsails are available in the luff finish of your choice with eyelets as standard. Our jibs use a wire luff encased in a pocket as standard.
* Corner patches are in the finger style, available in white, black, grey, light grey, navy blue, royal blue, yellow, red, green, fluro yellow, fluro orange or fluro pink.
* Jib luff tapes are available in white, black, grey, navy blue, royal blue, light blue, yellow, red, green, purple, fluro yellow, fluro orange or fluro pink.
* Tell tails are fitted to all jibs.
* World Sailing/IRSA 2017-2020 compliant re-usable sail numbering and class insignia templates are available for purchase through our store.
* All BG sails are made in materials that we believe to best suit each class. Film weights and translucency at times may vary slightly from those listed dependent on availability and suitability.
* M and 10R pocket luff mainsails (1850mm luff and lower) when available are manufactured under design agreement with SAILSetc.
* For Marblehead, 10 Rater (lower suits) and A Class (lower suits) when available, we have standard ratio sizes to suit many popular designs on file. Should our sail plans not be suitable, or you are unable to provide us with a full size accurate plan, we are happy to produce you a suit of custom sails at an additional fee.
Additional charges (per suit)
Wire luff in mainsail pocket (IOM, M) £7
Slides to suit groovy mast £7
Sail numbering outline in permanent marker £12
Pocket luff lower suit mainsail (M, 10R, RA) £25
Non standard sail film/materials POA
Custom sail plan POA
|
IOM SAILS
A suit £78
50 micron film lightweight 36 micron jib available on request, add £5 B suit £76 75 micron film, lightweight 50 micron jib on request C suit £74 75 micron film |
|
|
MARBLEHEAD SAILS
A suit standard weight (swing) £120
50 micron jib, 50/75 micron mainsail A suit lightweight (swing) £135 36/50 micron jib, 36/50/75 micron mainsail (Super lightweight 25/36 micron jib available on request POA) B suit £105 75 micron film C suit £100 75 micron film C2/C3/B2 suit £95 75/100 micron film |
|
|
TEN RATER SAILS
A suit £135
50/75 micron film B suit £115 75 micron film C suit and lower £105 75/100 micron film |
|
CUSTOM SAILS
For latest sail information on International or open design classes not listed we ask that you contact us to discuss availability.
As ever, we are open to new challenges that will advance sail and rig design at the leading edge of the sport. We encourage anyone wishing to benefit from our experience to feel free to make contact with us to discuss how we can assist with your project.
As ever, we are open to new challenges that will advance sail and rig design at the leading edge of the sport. We encourage anyone wishing to benefit from our experience to feel free to make contact with us to discuss how we can assist with your project.
© BG Sails & Design 2020